Description
High capacity manifolds intended for use with Shank 901 and 903 relief valves. All steel and stainless steel construction with Teflon O-rings on the stem. Due to Teflon sealing surfaces, these manifolds are rated for 500°F and 500# pressure. Construction is the same as the 900MW manifold except the 2” Schedule 160 pipe is replaced by a 2” FNPT half coupling. Cv rating for both ports is 47.5 (for the 901M), and 66 (for the 903M). Manifold weight is 30 lbs.
901M Port Sizes: 2” x 1 1/4” x 1 1/4” FNPT
901M manifolds can be used with the following relief valves
| Relief Valve | Assembly Weight (lb.) |
|---|---|
| 901D 1 1/4” x 2” x 3” | 81 |
| 901A 1 1/4” x 2” x 3” | 56 |
| 903D 1 1/2” x 2” x 3” | 81 |
| 903A 1 1/2” x 2” x 3” | 56 |
| 850D & 850RD 1 1/4” MNPT x 1 ½” FNPT | 56 |
| 850A & 850RA 1 1/4” MNPT x 1 ½” FNPT | 45 |
| 851D & 851RD 1 1/4” MNPT x 1 ½” FNPT | 56 |
| 851A & 851RA 1 1/4” MNPT x 1 ½” FNPT | 45 |
